Jamstik Studio LED meanings

There are two status LEDs on the Jamstik Studio MIDI Guitar, the charging status LED next to the USB-C port and the general status LED built into the push-button. 

Charging Status LED

The charging status LED can display the following:

Off	USB not plugged in
Green	USB plugged in, battery fully charged
Orange (Red+Green)	Charging in progress
Red	Charging fault

General Status LED

LED Sequence	Meaning
Green 500ms, Off 500ms	Ready to connect
Green 500ms, Orange 500ms	Ready to connect, battery low
Solid Green	Connected to USB or Bluetooth
Green fading in and out over 4s; Orange fading in and out over 2s	Connected, battery low
Orange fading in and out	Internal Diagnostics Check*
Off	Standby mode (lowest battery usage)

*Note: During the initial boot-up sequence the Jamstik Studio performs an Internal Diagnostics Check which may include a String Tuning test. If the Orange LED status continues for more than a couple of seconds after turning on, make sure to tune each string. Once tuned, strum all six strings in order for it to pass the initial diagnostics check, and then the LED will turn Green. The String Tuning test is only performed during the initial boot-up sequence from the factory or after removing/replacing the battery. In the event that you have tuned each string and strummed all six strings and the Orange LED persists, please submit a support request via our Help Center or by sending us an e-mail at [e-mail]