1. First, make sure that your Jamstik is 'Powered On' (the lights will be green).
2. Then, you'll hold down the 'Power Button' for 15 seconds.
The LEDs will start to flash red, and once the process is finished the lights will turn off and release the power-button on Jamstik.
3. Next, power the Jamstik back on so it can recalibrate the fretboard. You should see the Red LED light up briefly, *make sure to keep your hands off of the fretboard during this process.
4. Once the fretboard has been calibrated, the LED lights will turn green and you should be good to go!
If you perform a hard-reset but still need to reset your strings or re-calibrate, please visit: this article.