How to Hard Reset the jamstik+

Hard Reset through jamstik+ app

In some cases, you may find it necessary to do a hard reset of your jamstik+ to reset picking calibrations to factory settings.   This can solve issues such as oversensitive strings resulting in cross-talk, dead or non-sounding strings, and other calibration issues. 

  1. Within the jamstik+ app navigate to the settings menu (gear icon at the top upper right corner of the app)
  2. Click on Settings
  3. Click on the Reset button to reset you jamstik+ to factory Defaults
  4. If your jamstik powers down, and disconnects the reset was successful.  Power back on and resume connecting/playing!  

Note:  A hard reset will go back to factory defaults - so any setup that you previously had may be lost.

Hard Reset without the jamstik+ app
  1. Turn on your jamstik 
  2. Hold down the power button for 15-30 seconds until the LED turns off. Continue holding the power button until the LED rapidly flashes red
  3. Release the power button (Jamstik will power off)
  4. If your jamstik powers down, and disconnects the reset was successful.  Power back on and resume connecting/playing!
Powered by Zendesk