Q: How to reset the jamstik?

In some cases, you may find it necessary to do a hard reset of your jamstik to reset picking calibrations to factory settings.   This can solve issues such as oversensitive strings resulting in cross-talk, dead or non-sounding strings, and other calibration issues.  

Take the following steps to, "Hard Reset" your jamstik.

    1. Turn the jamstik on and wait for the amber sequence to be done.
    2. Press and HOLD the power button for about 30 seconds. 

During this 30 seconds the following status changes should occur:

    1.  Power light will turn off, but you must CONTINUE holding for 15 seconds, at which point the light will turn back on
    2. KEEP HOLDING until the light goes back OFF.

Your jamstik will now be reset to factory default settings. 

Powered by Zendesk